Regularly clean the cooling tower water-cooled chiller for more stable cooling

When the Cooling Tower is used in a water-cooled chiller, its function is also refrigeration. The working principle is as follows: the heat-carrying cooling water is exchanged with the air in the tower, and the heat is transferred to the air and dispersed into the atmosphere to achieve the purpose of providing cooling water to the water-cooled chiller. In the cooling water system, it mainly plays the role of saving water and reducing energy consumption.

With the arrival of the three days, the temperature is higher every day. How can the cooling effect of the water-cooled chiller not be better? In fact, this is because there are seaweed, sundries and scale in the pipes and basins of the cooling tower, and the other is that the condenser of the water-cooled chiller is dirty.

When the water-cooled chiller is used for six months, it is necessary to clean the condenser of the chiller and the water pipe. In addition, to clean the cooling tower, the correct cleaning method can be carried out as follows:

1. Clean up the sediment, scale, sludge, and long moss in the cooling tower, then clean the fan, sprinkler, packing, tray, drain and effluent filter with a water jet.

2. After cleaning the above components, start the circulating water pump, put the cleaning agent and the bactericidal algaecide in the cooling tower, and control the pH of the water between 5.5 and 6.0 to remove the scale and algae in the equipment pipeline. .

3. After cleaning the cooling tower, close the upper drain valve, reopen the water supply valve, and fill the cooling tower with water. At the same time, open the communication valve of the cooling tower to balance the water level of the connecting tower to avoid overflow.

The water temperature of the water-cooled chiller is different in the industry where the user is located. With the cooling tower, the heat in the water from the water-cooled chiller can be continuously taken away. If the cooling effect of the cooling tower is not good, then the water-cooled cold water is connected. The cold effect of the mechanism will definitely be greatly reduced. Ebara Refrigeration recommends that the new and old customers must regularly maintain the Cooling Towers and water-cooled chillers, so as to extend their service life and ensure the greater profitability of the plant.